eng_seq

Contents

• 1. Description

• 2. Schematic

• 3. Recipes in sequence

1. Description

Run apero_extract on specific files (based on DPRTYPE)

This should be run after preprocessing of all this type of files (usually this is done using pp_seq_opt). This should also be run after all calibration (reference and nightly) steps have been done.

• EXT_HC1HC1 will only extract files with DPRTYPE HC1_HC1 (i.e. UNe in both fibers)

• EXT_FPFP will only extract files with DPRTYPE FP_FP (i.e. FP in both fibers)

• EXT_FF will only extract files with DPRTYPE FLAT_FLAT (i.e. FLAT in both fibers)

• EXT_DFP will only extract files with DPRTYPE DARK_FP (i.e. DARK in science fiber and FP in the reference fiber)

• EXT_FPD will only extract files with DPRTYPE FP_DARK (i.e. FP in science fiber and DARK in the reference fiber)

• EXT_SKY will only extract files with DPRTYPE DARK_DARK_SKY (i.e. files identified as sky in science fiber and DARK in reference fiber)

• EXT_LFC will only extract files with DPRTYPE LFC_LFC (i.e. LFC in both fibers)

• EXT_LFCFP will only extract files with DPRTYPE LFC_FP (i.e. LFC in science fiber and FP in reference fiber)

• EXT_FPLFC will only extract files with DPRTYPE FP_LFC (i.e. FP in science fiber and LFC in reference fiber)

• EXT_EVERY will extract all files

2. Schematic

No schematic set

3. Recipes in sequence

Recipes

ORDER	RECIPE	SHORTNAME	RECIPE KIND	REF RECIPE	ARGS
1	apero_extract_spirou.py	EXT_HC1HC1	extract-hchc	No	{files}=[HCONE_HCONE]
2	apero_extract_spirou.py	EXT_FPFP	extract-fpfp	No	{files}=[FP_FP]
3	apero_extract_spirou.py	EXT_FF	extract-ff	No	{files}=[FLAT_FLAT]
4	apero_extract_spirou.py	EXT_DFP	extract-dfp	No	{files}=[DARK_FP]
5	apero_extract_spirou.py	EXT_FPD	extract-fpd	No	{files}=[FP_DARK]
6	apero_extract_spirou.py	EXT_SKY	extract-sky	No	{files}=[DARK_DARK_SKY]
7	apero_extract_spirou.py	EXT_LFC	extract-lfc	No	{files}=[LFC_LFC]
8	apero_extract_spirou.py	EXT_LFCFP	extract-lfcfp	No	{files}=[LFC_FP]
9	apero_extract_spirou.py	EXT_FPLFC	extract-fplfc	No	{files}=[FP_LFC]
10	apero_extract_spirou.py	EXT_FPHC1	extract-fphc1	No	{files}=[FP_HCONE]
11	apero_extract_spirou.py	EXT_HC1FP	extract-hc1fp	No	{files}=[HCONE_FP]
12	apero_extract_spirou.py	EXT_EVERY	extract-everything	No	{files}=[DRS_PP]