NLTT46858 (spirou_offline_udem)¶
This page was last modified: 2026-02-12 20:53:52.430628 (UTC)
Back to the object table
Contents¶
Target info¶
This section gives some details of the APERO astrometric database used when processing this target (e.g. for BERV calculation). Any observation with a object name in the alias list will be associated with this “APERO target” i.e. DRSOBJN=NLTT46858
Target Information |
|
|---|---|
RA |
nan [deg] (None) |
Dec |
nan [deg] (None) |
Finder chart |
|
Teff |
nan [K] (None) |
Spectral Type |
None (None) |
Proper Motion (RA) |
nan [mas/yr] (None) |
Proper Motion (Dec) |
nan [mas/yr] (None) |
Parallax |
nan [mas/yr] (None) |
Radial Velocity |
nan [mas/yr] (None) |
Aliases |
NLTT46858, WDS J18409+3132B, LHS 3402, CCDM J18409+3132B, IDS 18371+3128 B, PM J18409+3131S, UBV 15894, LFT 1426, ASCC 604684, LSPM J1840+3131S, Gaia DR2 2090050284463109248, TYC 2637-1534-2, ** HJ 1337B, BD+31 3330B, 2MASS J18405518+3131521, NLTT 46858, LTT 15509, GEN# +0.03103330B, CSI+31 3330 2, ADS 11576 B, Karmn J18409+315 |
OBJECT name(s) in headers |
BD+31 3330B, NLTT46858 |
PI name(s) in headers |
Ryan Cloutier, Farbod Jahandar |
Project/Run name(s) in headers |
21AC33, 19AC26 |
Spectrum¶
This section presents the observation after extraction,with and without telluric correction.
LBL¶
No LBL reduction found
CCF¶
This section presents the APERO CCF results for this object.
CCF stats |
|
|---|---|
Mask used |
GL846_neg.fits |
CCF systemic velocity |
28190.10 \(\pm\) 104.86 m/s |
CCF FWHM |
9136.77 \(\pm\) 349.34 m/s |
Number of CCF files Total |
10 |
Number of CCF passed QC |
10 |
Number CCF files failed QC |
0 |
First ccf file [Mid exposure] |
2019-05-01 14:15:22.445 |
Last ccf file [Mid exposure] |
2021-05-01 15:15:06.117 |
Last processed [ccf] |
2025-02-23 21:08:51.653 |
Version [ccf] |
0.7.292 |
Request |
|---|
CCF Downloads |
File URL |
Uploaded |
|---|---|---|
CCF Table |
2026-02-12 20:53:55.155 |
Time series¶
This section deals with providing the time series information for this object
Debug¶
This section has various debug plots from APERO products
Telluric map¶
Telluric map of e2dsff_tcorr_A files.Files are low-passed and corrected for the stars motion. The QC is displayed to the right of the image - in purple are the files that passed, in orange the files that failed.
Maximum Saturation level plot¶
Maximum saturation level measured at time of extraction
Measured effective readout noise before extraction¶
Measured effective readout noise before extraction
APERO Processing Debug Plot¶
Plotting the version and processed date from the header from APERO. Note that offline reductions should lead to a straight line, while online reductions should be roughly a one-to-one with the Date axis.
APERO Calibration times plot¶
Computed time between observation and calibration used. Some calibrations arereference calibrations (in purple) and thus diverge from the reference night, others should always be from the same night (orange) unless no calibration was taken that night in which case the closest calirbation in time should have been used.